Description
This kit is for the crowd looking to be around or below the 500hp mark, this turbo has very good driving characteristics and will do very well towing.
This kit is the full IDP T4 mounting system with 304ss up-pipes and intercooler piping. And includes the S366 turbo. Just hook up your air filter and exhaust and this system is ready to run!
Please select year of truck!!
Also add a wastegate kit to your Superduty mount if wanting to run a 238/100 or larger injector and have an excellent spooling street turbo, while having the wastegate to maintain proper back pressures.
***You can also now upgrade to the 366SXE turbo That comes STANDARD with the 360* thrust washer and billet wheel for even more durability when running hybrid injectors!!! We highly recommend this turbo over the standard 366 because of the better flow and durability. Click here for that turbo package.
*Please select year of truck.
*NEW: Bypass tube now available for the 94-97 trucks that do not want to do an intercooler! Choose this option to substitute for intercooler pipes and you will get the boots and the pipe to seamlessly connect your turbo to our intake Y in the kit without the use of an intercooler. (3″ plenums required)
** Fire wall modifications might be necessary (depending on your body mount conditions) for the down pipe, even if you have a 3″ down pipe for the stock turbo in place already.
**94-97 trucks must have electric fuel system and 3″ intake plenums to run our T4 kit.
- Turbo Kit Parts list
1 Pedestal OBS/SD
1 L Bracket OBS/SD
1 Bellowed Up-pipe Assembly OBS/SD
1 Braided Oil supply line OBS/SD
1 Stainless Oil drain line OBS/SD
1 Aluminum turbo drain flange OBS/SD
1 Aluminum valley drain flange W/O-ring OBS/SD
1 Stainless Intake Y OBS/SD
1 Intercooler pipes, SD 2 pipes. OBS 3 pipes OBS/SD
1 4” stainless intake pipe OBS/SD
1 Downpipe lower and upper section OBS 3”, SD 4”. OBS/SD
1 4” V-band clamp SD downpipe upper to lower connection SD
1 3.5” or 4” v-band for S300 or S400 style turbo OBS/SD
1 Band clamp for 2 piece OBS downpipe connection OBS
1 Compressor intake boot. 4” for S300, 5” for S400 & 5.5” for Race cover. OBS/SD
2 Clamps for intake boot to turbo and intake pipe. OBS/SD
1 3/8”NPT X 10JIC 45* fitting OBS/SD
1 1/2”NPT x 10JIC 45* fitting OBS/SD
1 1/8”NPT x 6JIC straight fitting OBS/SD
1 1/4”NPT x 6JIC straight fitting OBS/SD
1 3/8″ plug for intake Y, not used on SD OBS
1 Pedestal O-rings OBS/SD
9 M8 flange bolts for pedestal and up-pipes OBS/SD
4 M10 studs with flat washers and nuts OBS/SD
4 M8x40 flange bolts and locking flange nuts, up-pipe to manifold. OBS/SD
