Description
Full IDP T4 mounting kit with S467.7 turbo and all parts needed for installation!!
This turbo is an excellent choice for stage 2 up to 350/200 injectors. This is the same turbo used in our truck seen in the videos in our gallery section. This turbo performs very well and has excellent street manners also and the ability to tow when needed.
**YOU MUST CHOOSE OUR FLAT PLENUMS ON THE 467.7 kits!
*Please select model of truck you have.
Now you can add the 360* thrust washer upgrade for even more durability! This is the set up we run all the way up to 950 RWHP spraying nitrous!!
***94-97 trucks: We recommend replacing the body mounts if your are worn out to make the down pipe fit easy, find them HERE
*NEW: Bypass tube now available for the 94-97 trucks that do not want to do an intercooler! Choose this option to substitute for intercooler pipes and you will get the boots and the pipe to seamlessly connect your turbo to our intake Y in the kit without the use of an intercooler. (3″ plenums required)
(Also know as the S468)
**94-97 trucks must have electric fuel system to run our T4 kit.
- Turbo Kit Parts list
1 Pedestal OBS/SD
1 L Bracket OBS/SD
1 Bellowed Up-pipe Assembly OBS/SD
1 Braided Oil supply line OBS/SD
1 Stainless Oil drain line OBS/SD
1 Aluminum turbo drain flange OBS/SD
1 Aluminum valley drain flange W/O-ring OBS/SD
1 Stainless Intake Y OBS/SD
1 Intercooler pipes, SD 2 pipes. OBS 3 pipes OBS/SD
1 4” stainless intake pipe OBS/SD
1 Downpipe lower and upper section OBS 3”, SD 4”. OBS/SD
1 4” V-band clamp SD downpipe upper to lower connection SD
1 3.5” or 4” v-band for S300 or S400 style turbo OBS/SD
1 Band clamp for 2 piece OBS downpipe connection OBS
1 Compressor intake boot. 4” for S300, 5” for S400 & 5.5” for Race cover. OBS/SD
2 Clamps for intake boot to turbo and intake pipe. OBS/SD
1 3/8”NPT X 10JIC 45* fitting OBS/SD
1 1/2”NPT x 10JIC 45* fitting OBS/SD
1 1/8”NPT x 6JIC straight fitting OBS/SD
1 1/4”NPT x 6JIC straight fitting OBS/SD
1 3/8″ plug for intake Y, not used on SD OBS
1 Pedestal O-rings OBS/SD
9 M8 flange bolts for pedestal and up-pipes OBS/SD
4 M10 studs with flat washers and nuts OBS/SD
4 M8x40 flange bolts and locking flange nuts, up-pipe to manifold. OBS/SD
