IDP T4 Complete Mounting Kit (no turbo)

Description

T4 complete mounting kit for 7.3L trucks. Can be used to mount up S300/S400 and GT 42 turbo chargers.

Kit includes: Pedestal, collector with 304ss up-pipes, 304ss intercooler piping and intake Y, two piece 4″ downpipe, valley return fitting, stainless oil supply and drain lines, 4″ stainless intake tube for 4″ filter and all hardware for installation.

Please be sure to select the turbo you will be running with the mounting system below. The 3.5″ v-band discharge compressor covers will have a custom 304ss flange welded on and will include the v-band clamp and o-ring for installation.

If you are wanting 321 stainless please alow a week for assembly.  99% of the people out there do NOT need 321ss, we have been making over 700hp on the 304ss!  Call for price!

And select the model of truck the kit will be installed on.

*NEW:  Bypass tube now available for the 94-97 trucks that do not want to do an intercooler!  Choose this option to substitute for intercooler pipes and you will get the boots and the pipe to seamlessly connect your turbo to our intake Y in the kit without the use of an intercooler. (3″ plenums required)  

**94-97 trucks must have electric fuel system to run our T4 kit.  

***94-97 trucks:  We recommend replacing the body mounts if your are worn out to make the down pipe fit easy, find them HERE 

NEW Install instructions

• Turbo Kit Parts list
  1 Pedestal OBS/SD
  1 L Bracket OBS/SD
  1 Bellowed Up-pipe Assembly OBS/SD
  1 Braided Oil supply line OBS/SD
  1 Stainless Oil drain line OBS/SD
  1 Aluminum turbo drain flange OBS/SD
  1 Aluminum valley drain flange W/O-ring OBS/SD
  1 Stainless Intake Y OBS/SD
  1 Intercooler pipes, SD 2 pipes. OBS 3 pipes OBS/SD
  1 4” stainless intake pipe OBS/SD
  1 Downpipe lower and upper section OBS 3”, SD 4”. OBS/SD
  1 4” V-band clamp SD downpipe upper to lower connection SD
  1 3.5” or 4” v-band for S300 or S400 style turbo OBS/SD
  1 Band clamp for 2 piece OBS downpipe connection OBS
  1 Compressor intake boot. 4” for S300, 5” for S400 & 5.5” for Race cover. OBS/SD
  2 Clamps for intake boot to turbo and intake pipe. OBS/SD
  1 3/8”NPT X 10JIC 45* fitting OBS/SD
  1 1/2”NPT x 10JIC 45* fitting OBS/SD
  1 1/8”NPT x 6JIC straight fitting OBS/SD
  1 1/4”NPT x 6JIC straight fitting OBS/SD
  1 3/8″ plug for intake Y, not used on SD OBS
  1 Pedestal O-rings OBS/SD
  9 M8 flange bolts for pedestal and up-pipes OBS/SD
  4 M10 studs with flat washers and nuts OBS/SD
  4 M8x40 flange bolts and locking flange nuts, up-pipe to manifold. OBS/SD